SkudoBoard HT INTERLOCK is a heavy duty, synthetic, rigid board that provides superior protection under forklift and general construction traffic. The interlocking tabs also keep the board from slipping and moving out of place.
Use wherever you would protect your surfaces with Masonite or plywood. Ideal for use under work stations – pipe cutting, finish carpentry, painting.
The textured surface of SkudoBoard HT INTERLOCK is fire retardant, water resistant and resists curling and warping – reducing safety hazards on your jobsite. The high compression strength protects from dropping objects and spreads the load under forklifts, keeping your floors safe. It can also be used for extreme vertical protection.
Features & Benefits
- Interlocking tabs keep SkudoBoard securely in place
- Water resistant, can be used on exterior surfaces
- Replaces curling Masonite and plywood
- Fire Retardant
- Test-proven slip resistance in wet conditions (ANSI/NFSI B101.3-2012)
- Extremely high impact resistance – spreads impact loads
- Ideal for use under work stations – i.e. pipe cutting, finish carpentry,painting.
- Ideal for forklift and material cart protection
- Well suited for protecting floors from jobsite traffic and debris
- Light weight, easy to handle and reusable
- Far superior to cardboard protection products
- Edge pieces available to fill in gaps when placing against walls
SkudoBoard HT INTERLOCK Product Data
SkudoBoard HT Interlock
- Dimensions: 3.75’ x 3.75’
- Square Footage: 14 sq. ft./board
- Product #BOARD-HT-FR-3.75-INTRL
- Weight: 4 lbs/sheet
- Thickness: 1/8”
- Color: Light Gray
SkudoBoard Technical Data
| Property | Test Standard | Units | Result Average Value | Standard Deviation |
|---|---|---|---|---|
| Board Thickness | mm | 5.00 | 0.10 | |
| Unit Weight | g/m 2 | 1524 | 66 | |
| Flexural Strength, MD | ASTM D790 (Modified) | psi | 1433 | 87 |
| Flexural Strength, TD | ASTM D790 (Modified) | psi | 1344 | 78 |
| Flexural Modulus, MD | ASTM D790 (Modified) | Kpsi | 120 | 9 |
| Flexural Modulus, TD | ASTM D790 (Modified) | Kpsi | 112 | 5 |
| Gardner Impact Mean-Failure Impact | ASTM D5420 | in | 4.3 | 0.9 |
| Flat Crush Resistance | ISO 3035 TAPPI-825 | psi | > 1000 | |
| Edge Crush Resistance | ISO 3037 TAPPI-811 | lb./in | 88 | 22 |
Note:
- Flexural Test: 12” x 12” sample with 10” span, 3-point bending
- Gardner Impact Test: 8 lb. steel-rod impact mass
- MD: Machine Direction
- Weight: 3.5 lbs./roll
- TD: Transverse Direction
- Kpsi = 10 3 psi